C-Clean Instructions

Over time hard water mineral buildup creates a scale on the plates of your ionizer. This is why it’s important to run a citric acid flush ideally every year.

The Chanson Citric Acid C-Clean Kit Instructions are as follows:

1. Place a C-Clean Kit Filter Pad on the C-Clean Cartridge Bottom Section;
2. Fill the C-Clean Cartridge Bottom Section with the supplied Chanson Citric Acid Powder to the ‘Fill to Here‘ line;
3. Screw the C-Clean Cartridge Cap to the C-Clean Cartridge Bottom Section;
4. Screw the C-Clean Cartridge to the Ionizer Filter Assembly where the Chanson PJ7000 Replacement Filter was removed from.
5. Run the unit on filter mode for 10-15 seconds.
6. Let the solution sit for 1-2 hours*. Then turn the machine on to filtered setting again and let it flush for 5 minutes straight. That’s it now you can open the cap and put the new filter in.

*For older units, especially those who this cleaning method has not been done on in more than a few years, you may need to let the machine sit with the citric acid solution overnight, and run this multiple times in order to properly clean the plates. For units 10 years and older, we recommend that you upgrade your unit. We offer special discounts for existing Chanson customers.

Do you have any questions, or need further support? Don’t hesitate to contact us at 858- 771-4010 or email support@chansonglobal.com